Seat With A Built-In Heater - Hitachi Zaxis 850LC-3 Operator's Manual

Armrest Adjustment
Armrest (5) can be pulled upright by hand to get on and off
the machine easily.
The angle of armrest (5) can be adjusted to the desired posi-
tion by turning adjusting dial (6) located on the bottom of
armrest (5).

SEAT WITH A BUILT-IN HEATER

Raise the armrest, the heater installed inside the seat acti-
vates by operating seat heater switch (8) on the optional
equipment control switch panel.
When seat heater switch (8) is turned ON, the seat surface
is heated so that the seat section becomes warm. When the
temperature of the seat section is raised to the specified
temperature, heating is automatically stopped.
NOTE: Depending on what kinds of optional equipments are
installed, the switch button function may differ. Use the
switch only after confirming the kinds of the installed
optional equipment.
OPERATOR'S STATION
5
6
1-88
M1G6-01-017
Armrest
8
M1J1-03-001
8
M1U1-01-011