Attachment Selection (Only Machines Equipped With Optional Parts) - Hitachi Zaxis 850LC-3 Operator's Manual

ATTACHMENT SELECTION
(Only Machines Equipped with Optional Parts)
IMPORTANT: Select the attachments from the work mode
screen.
In order to display the work mode screen,
push key F1 after basic screen displays, or
select from main menu.
Selecting an Attachment by Using Key F1
1. When the basic screen displays, push key F1 and display
the work mode screen.
2. Push a key located under an attachment mark to be used
in order to select the attachment.
(In the right example, Breaker 1 is selected.)
NOTE: When selecting Digging, return to the basic screen.
3. On the attachment specification screen, confirm if speci-
fication of the installed attachment agrees with that dis-
played on the screen.
NOTE: When pushing the back key, return to the previous
screen.
4. Push the determination key, and the basic screen dis-
plays.
OPERATOR'S STATION
Digging
1-22
Basic Screen
Key F1
Work Mode Screen
Select Breaker 1
Breaker 1
Maximum Pump Flow Rate
Maximum Engine Speed
Valve Selector Accumulator
2-Speed Selector OFF 2ndary Hydraulic Relief Selector
1 2 3 4
6 7 8 9
F1 F2 F3
Attachment Specification Screen
M1J1-01-002
Back Key
T1J7-02-01-002E
260
L/min
1700
-1
min
5
0
F4
Determination
key
T1JB-05-02-002E