Panel Protector - Eizo FC-2091 User Manual

English

4. PANEL PROTECTOR

The panel protector is enclosed into the package for the protecting the LCD panel.
Please install it as following installation procedure.
NOTE
Surface of the panel protector shows the dirt (dust or finger prints) easily. Please
use the enclosed gloves while installing and removing the panel protector.
Please be careful not to scratch the LCD panel or the cabinet with the panel
protector during installation. Also please do not remove the panel protector often. It
may scratch or result in damage to the LCD panel.
Installation
1.
Before installation, please remove dust and stains from the LCD
panel.
2.
Set the panel protector into the grooves of the panel frame; the lower
first (1), then the upper (2).
3.
With the enclosed tool (Lever) set the stoppers of the panel protector
into the side grooves (6 stoppers).
NOTE
Position the protector into the LCD panel tightly without leaving an opening.
Removing
Release the stoppers of the panel with the lever and remove the panel.
16
4. PANEL PROTECTOR
Lever