Table of Contents
Advertisement
NOTE
When housing the cables into the cable holder, lead them to the cable entrance
side and pinch the projection to open the cable entrance.
The cables are recommended to lead with slight sag for the smooth motion of
the stand.
5.
Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
6.
Turn on the monitor's main power and then switch on the PC's
power.
If an image does not appear, refer to the "TROUBLE SHOOTING" (p.22) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
Adjust brightness of the screen depending on the brightness of your environment.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
Projection
Cable Entrance
Cable Holder
2. CABLE CONNECTION
English
13
Advertisement
Table of Contents
