Eizo Nanao Corporation. Eizo Nanao Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to Eizo Nanao Corporation’s receipt of said information.
PRECAUTIONS IMPORTANT • This Product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. •...
Page 5
WARNING • Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillange into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
Page 6
WARNING • To disconnect the power cord, grasp the plug firmly and pull. Never tug on the cord, doing so may cause damage and could result in fire or electric shock. • The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock.
Page 7
WARNING • Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash throughly.
Page 8
CAUTION • Do not touch the plug with wet hands. Touching the plug with wet hands is dangerous and can cause electrical shock. • Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem.
LCD Panel • The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to th characteristics of the panel itself, and not the product. • The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.
• The portrait/Landscape display capability p.24) • Power saving function (DVI-DMPM • The FA-2090 supports dual video input. The video input setting and the power saving function depend on settings by graphic boards. • The power saving function is always “ON” during operation.
1-3. Controls, Connectors & Functions Controls & Connectors [Front] (3) (4) Main Power Switch Contrast Adjustment Button (+, -) Brightness Adjustment Button (+, -) Power Button Power Indicator Indicated Color Power-on status Green Power is on/ Main power is off Yellow Power save mode Slowly flashing Yellow...
Page 12
[Rear] (10) Height Adjustable Stand (Detachable) DVI-I Input Connector (Signal 1) DVI-I Input Connector (Signal 2) Power Connector (10) Security Lock Slot The LCD monitor can be used with an optional arm stand by removing the stand (see page 19) Allows for connection of a security cable.
Functions The LCD monitor offers two (2) functions for screen adjustment and a useful function for daily use. Brightness Adjustment Adjust screen brightness level by each (+) or (-) key of Brightness Adjustment Button. To finish the adjustment will save the data automatically. Contrast Adjustment Adjust screen contrast level by each (+) or (-) key of Contrast Adjustment Button.
2. CONNECTING UP 2-1. Before connecting Supported Resolution The FA-2090 can be used to connect with the special graphics board which has a capability of dual video signal output. This monitor supports the following mode and input video signal. Supported Resolution •...
2-2. Connecting the signal cable The FA-2090 has two display area on a display panel. To display both area, it is required to plug signal cables to each Signal 1 or Signal 2 connector. Signal 1 Signal 2 Signal 1...
Page 16
• Check that both Signal 1 and Signal 2 connector is securely connected. If not, the images cannot be displayed. Plug the power cord into the power connector on the rear of the monitor Lead the power cord and signal cables into the cable holder at the rear of the monitor.
Page 17
Plug the other end of the power cord into a power outlet. WARNING • Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock.
2-3. Portrait monitor setting This monitor can be rotated counterclockwise and used as a portrait monitor. • Be sure that the power switche of the monitor is OFF. • Hold upper-left and bottom-right corner with both hands, then gently rotate the display panel.
3. ATTACHING AN ARM STAND The LCD monitor can be used with an arm stand by removing the tilt stand and attaching the arm stand to the LCD monitor. • Use an arm stand that satisfies the followings. • When using the LCD monitor with an arm stand, the arm stand must be VESA approved : M4 (4 points) * Use an arm stand with a 100 mm x 100 mm hole...
Page 20
Attach an arm stand to the LCD monitor securely. WARNING • When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage.
4. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact your dealer. Problems Points to check with possible solutions 1. No picture • Indicator status: Off Check that the power cord is correctly connected. If the problem persists, turn off the monitor power for a few minutes, then turn it back on and try again.
5. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent.
7. GLOSSARY Afterimage The After image is particular to LCD monitors when the monitor screen is left on for a long period without use. The “After image” can be removed gradually by changing the displayed image. (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method “TMDS”.
Dimensions Abmessungen Dimensions SIDE VIEW FRONT VIEW TOP VIEW SEITENANSICHT VORDERANSICHT DRAUFSICHT VUE DE COTE VUE DE FACE VUE D’EN HAUT Pin Assignment Pin-Belegung Affectation des Broches * DVI-D Connector Signal Signal Signal TMDS Data2- TMDS Data1/3 Shield TMDS Data2+ TMDS Clock Shield TMDS Data2/4...
For U.S.A, Canada, etc. (rated 100-120 Vac) Only WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner von Roll MBB Recycling GmbH. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden.