English
2. CABLE CONNECTION
2-1. Connecting the signal cable
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
Please refer to the manual of the PC also to connect the monitor.
1.
Pivot the panel in the counter-clockwise to fix in portrait position.
2.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Signal Cable
(FD-C39 enclosed)
3.
Plug the power cord into the power connector on the rear of the
monitor.
4.
Lead the power cord and signal cable into the cable holder at rear of
the monitor.
12
2. CABLE CONNECTION
90
Signal Cable
Power Cord
Connector
Video Output
Connector DVI
PC
Digital graphics card