Selecting Display Settings - Wyse Winterm S10 User Manual

Setting Up the Thin Client

Selecting Display Settings

The Display Setup dialog box allows you to select the resolution and refresh rate for the
monitor used with the thin client. The number of icons that can be displayed on the
desktop depends on the desktop resolution and administrator configuration.
If configured by your administrator (Longapplicationname=yes as defined in
wnos.ini), the number of icons displayed for a resolution is as follows:
•
•
•
•
•
•
•
•
•
•
•
Figure 21 Display Setup
Key - If active (depending on Encryption option), enter the key according to the
dialog box Note area. The selected key is used to encrypt/decrypt each frame
transmitted from or received by the wireless adapter. The access point must
recognize frames encrypted by the same key. Keys can be 5 or 13 characters for
the 64 or 128 bit encryption key, or specified as 10 or 26 hex-decimal digits.
Note
On thin clients that only support 8 bit color, the 1280 x 1024 resolution will be
used to display full screen connections. The 1280 x 1024 resolution will not
be used to display the desktop, windowed connections, or seamless
connections.
640 x 480: Up to 8 icons are displayed.
800 x 600: Up to 10 icons are displayed.
1024 x 768: Up to 21 icons are displayed.
1280 x 1024: Up to 40 icons are displayed.
1360 x 768: Up to 28 icons are displayed.
1400 x 1050: Up to 40 icons are displayed.
1440 x 900: Up to 32 icons are displayed.
1600 x 1200: Up to 60 icons are displayed.
1680 x 1050: Up to 50 icons are displayed.
1920 x 1080: Up to 60 icons are displayed.
1920 x 1200: Up to 72 icons are displayed.
39