Wyse Winterm S10 User Manual page 34

26
Chapter 2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• 1600 x 1200
• 1680 x 1050
• 1920 x 1080
• 1920 x 1200
Colors - Select the color depth of the RDP session. If High Colors (16 bits) or True
Colors (32 bits) is selected and the RDP server does not support this color depth, the
thin client renegotiates the color depth to the lower value (for example, 256 Colors (8
bits). The highest is 32 bits, if hardware supports it.
Note
For some thin clients versions, only the 256 Colors (8 bits) selection is
available for RDP connections. Also, for older versions of the server software
(for example, RDP 4.0) the server only supports 8 bit color. This is not
detectable in advance but results in use of 8-bit color when the connection is
established.
Window mode and Full screen mode - Select the initial view of the application in a
windowed screen or full screen. You can toggle between viewing modes by using
CTRL+ALT+UPARROW.
Wallpaper - When selected, disables the desktop wallpaper.
Menu / Window animation - When selected, disables the menu or window animation.
Theme - When selected, disables the desktop themes.
Show content when dragging - By default, when you grab a Window by the title bar
and move it around, the contents of the window will move with it. Select this to disable
this content view so that only the outline of the window moves when dragging it, until
you drop the window. This option can be beneficial, as it uses less processing power.
Font smoothing - Converts vector text to bitmap for better display. This option is
enabled by default.
Auto-connect on start-up - When selected, automatically connects the session on
start-up.
USB - Redirects locally attached USB devices on the thin client to a Microsoft Windows
terminal server. When the user connects to the terminal server, locally attached USB
devices on the thin client are accessible.
Re-connect after disconnect - When selected, causes the thin client to automatically
reconnect to a session after a non-operator-initiated disconnect. If selected, the wait
interval is that set in the Delay before re-connecting box or the user profile for yes
(20 seconds) or seconds. The default is 20 seconds if there is no INI file description of
this connection, or is a Stand-alone user, or is simply omitted.
Turn compression off - When selected, turns compression off (intended for
high-speed connections).
Optimize for low speed link - When selected, allows optimization for low-speed
connections, such as reducing audio quality and/or decreasing protocol-specific cache
size. Intended for a connection spanning a WAN link or using dialup.
Auto-connect to local devices - Select any of the options (either Printers, Serials,
Smart Cards, Sound, and Disks) to have the thin client automatically connect to the
devices.
Delay before re-connecting - Becomes active if Re-connect after disconnect is
selected. Enter the number of seconds (1 to 3600) before trying to reconnect after a
disconnect.
Mouse queue timer - Specifies the default queue timer of a mouse event in an ICA or
RDP session (in 1/100 of a second). It can be used to adjust the bandwidth of a
network.