Up-D2500 Series Printer Driver - Sony UP-D2500 Service Manual

(ao'on)oosza-dn
Gh-
UP-D2500 Series Printer Driver for Windows95
Before You Begin
1. If you plan to operate the printer in the ECP mode, you need to set your PC's BIOS to ECP.
For more details, refer to your PC's documentation. Note that some PCs may not support the
ECP mode.
2. Be sure to use an IEEE1284-compliant cable. Using printer cables not compliant with IEEE-
1284 may result in incorrect printing.
Installation
1, Connect the UP-D2500 series printer to your PC.
2. Turn on the UP-D2500 series printer.
3. Turn on your PC.
4, When Windows95 starts up, the following dialog will appear. Select "Driver from disk
provided by hardware manufacturer."
5. Insert the disk labeled "PRINTER CHOOSER LEVEL DRIVER?" into the floppy drive.
7. From the "Add Printer Wizard" dialog, click on "Finish".
Add Punter Wizard
8. When the "Insert Disk" message appears, insert the disk labeled "PRINTER COLOR TABLE"
and click on "OK".
RAE
This completes the install:
Note If your PC is already running, you can go to Control Panel - System - Device
Manager and click on Update to install the driver in the same way.