Troubleshooting; Procedure Before And After Repair; Upgrading Of Firmware And Download Of Printer Driver - Sony UP-CX2 Service Manual

Digital photo printer

Hide thumbs Also See for UP-CX2:

Operating instructions manual (25 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

Table of Contents

6-1. Procedure Before and After Repair

Operation before repair if possible

1. Prepare a reference for the replacement of a thermal head.

. Print a test pattern (16STEP). (Refer to Section 2-2-2.)

. Display the voltage of a thermal head in System Info and record it. (Refer to Section 5-3-3.)

2. Compare the failure situation of a market with the contents of error history. (Refer to Section 5-3-4.)

3. Save the information on the board for board replacement.

. Save system setting and error records using an Export CSV function. (Refer to Section 5-3-5.)

. Save the setting information on the MA-140 board using an Export Binary function.

(Refer to Section 2-5-1.)

Conﬁ rmation after repair

. Turn on the power with the print media set. Mechanical operation is terminated and a start screen

appears normally.

. The ﬁ rmware version on the System Info screen is updated normally. (Refer to Section 5-3-3.)

. Print a test pattern (16STEP). No problem occurs in picture quality, and the density is equal to the print

result before repair. (Refer to Section 2-2-2.)

. Connect this unit with PC. Conﬁ rm that data is printed. (A printer driver is required to conﬁ rm the

connection with PC.)

6-2. Upgrading of Firmware and Download of Printer Driver

Upgrading of ﬁ rmware

The module below is provided when updating the ﬁ rmware of this unit.

. For obtaining the latest module, please contact your local Sony Sales Ofﬁ ce/Service Center.

. Refer to the "Sony digital photo printer page" below for the latest information of ﬁ rmware.

Japanese: http://www.sony.co.jp/Products/DP-driver/index.html

English: http://www.sony.net/Products/DP-driver/index.html

File name

Outline

cx2fxxx.exe

Firmware update module of MA-140 board

. It takes about one minute to upgrade ﬁ rmware. Be sure to keep the power during upgrading because PC

restarts after upgrading is completed. This unit will fail to recover and the replacement of the MA-140

board will be required if the power is turned off halfway.

. A version number is inserted into "xxx".

UP-CX2

Section 6