Table of Contents
Advertisement
3-5.
MAIN SERVICE COMMANDS (EXCLUDING MECHANICAL
ADJUSTMENTS)
<EXEC> indicates the WRITE command.
1. Head voltage adjustment
<Contents>
The head voltage increases when the DATA value is increased.
[PAGE] ] [ADR3FH] [DATA**H] R/W
2. Front LED lighting check
R/W Print LED
RW Alarm LED
R/W Ribbon LED
R/W Paper LED
Lights with
Goes off with
3. Display of reminding number of printed sheets
<Contents>
Displays the number of printed sheets remaining in continuous printing.
PAGE4 | | ADROFH]|
| DATA**H|
Hexadecimal display R
4. Setting of number of continuous printed sheets
<Contents>
Sets the number of printed sheets to be printed in continuous printing.
PAGE4 | [ADR10H | |DATA**H/ Hexadecimal display R/W
5. Bell muting
<Contents>
The bell will not ring. Rings again when power is turned on and then off.
PAGE4 | |ADR14H|
[DATA01H| R/W
6. Bell check
PAGE4|
| ADR17H|
[EXEC] W Bell rings once
| PAGE4 | | ADR18H | [EXEC] W Bell rings three times
7. Reset of number of printed sheets after replacing head
<Contents>
The number of printed sheets after replacing head is set to 0.
PAGE4 | | ADR23H | [EXEC] W
3-10
UP-D250(LJC,CE)
Advertisement
Table of Contents
