Table of Contents
Advertisement
NG command list 2
Away of looking the list: In case h ' 0A = 0000 1010(Refer to HEX code converting as binary
code.)
NG sensor is first bit(PLT CV) and third bit(PP SIZE sensor)
NG __CODE2
NG command]
NG bit
NG_CODE3
bit 1
PLT_CV sensor
Contents of NG
Board/REF
Check item
SE-427 board/PH501
SE-428 board/PH550
SE-426 board/PH450
SE-419 board/S150
KICK_OUT sensor
SE-430 board
NG command|
NG bit
bit 5
bit 4
Room thermistor
PRT-11 board TH1
Head thermistor
Head thermistor
;
Thermal head
Room thermistor
EEPROM
ERROR
SE-417 board/IC1
UP-D2500(UC,CE)
EEPROM
ERROR
¢ Connector is removed.
¢ Part is defective.
¢ The sensor becomes ON by mistaken
assembling the mechanism.
¢ Connector is removed.
e Thermal head
¢ Part is defective.
* Connector is removed.
¢ Part is defective.
Contents of NG
Board/REF
Check item
3-19
Advertisement
Table of Contents
