Table of Contents
Advertisement
OL-L
Before Printing (continued)
(a
SCENE NEY SINAN
SN
AIG
TS
NII
TR
rr
Cl
Loading the Paper
Hae nti aia
a
(ao'9
fleosza-an
To load paper, follow the procedure below. Be careful not to touch the printing
surface.
Use only ink ribbon cartridge and paper that are designed for use with this printer.
Failing to do so is likely to result in unsatisfactory printing or malfunctions.
1 Open the front panel by pulling the front panel top towards you.
2 Push the part marked with PUSH on the paper tray.
The paper tray pops out.
3 Place the paper in the paper tray.
+ The amount of paper that the paper tray holds depends on the paper in use.
When adding paper to a partly full tray, be careful that the total number of
sheets does not exceed the limit. If you exceed this limit, paper jams may
occur.
The limit is the amaunt of paper coutained in one printing pack.
For detailed information on the maximum amount of paper that the paper tray
can hold, see "Ink Ribbon Cartridge and Paper" page 22.
* Do not place different types of paper in the tray. Doing so may cause paper
jams to occur,
* Load the paper so that it lays flat in the paper tray. If the paper is curled, it
will overflow from the paper tray and the printing position may shift. If this
happens, load fewer sheets in the paper tray.
~
=
Riffle the paper
Set the paper securely under
the tab.
Front
5 Close the front panel.
When handling the paper
Do not touch the printing surface. Dust or finger prints are likely to cause
unsatisfactory printing or malfunction of the head. Hold the paper by the printing
surface protection sheet.
When storing print paper
* Avoid storing the print paper in a location subject to:
—
high temperatures
— high humidity
—
excessive dust
—
direct sunlight
¢ Use the original package for storing unused paper.
Operation
| 19
Advertisement
Table of Contents
