Wolf DD30I Installation Instructions Manual page 5

I N S TA L L AT I O N I N S T R U C T I O N S
B L OW E R O P T I O N S
Wolf downdraft Models DD30I, DD36I and
DD45I include a 500 CFM internal blower.
Models DD30R, DD36R and DD45R are shipped
without a blower assembly and can be used
with the remote blowers listed below. Remote
blowers are available as sales accessories.
Models DD30R, DD36R and DD45R
900 CFM Remote Blower
1200 CFM Remote Blower
1500 CFM Remote Blower
IMPORTANT NOTE: Blower options vary with
the cooking surface. For recommendations,
refer to the Wolf Design Guide found on the
Wolf website, wolfappliance.com.
IMPORTANT NOTE: Install this downdraft
ventilation system only with a Wolf blower.
1
45 / "
2
(1156)
1
9 / "
16
1
41 /
(230) 4
(1048)
1
1 / "
2 (38)
DEPTH OF
DOWNDRAFT CHIMNEY
Overall dimensions – Models DD45I and DD45R
Dimensions in parentheses are in
millimeters unless otherwise specified.
C O N T R O L
IMPORTANT NOTE: The downdraft must be
used with a Wolf-approved control module and
top cover.
The remote-mounted control module and top
cover are available in the classic, platinum and
carbon stainless steel finish for Models DD30
and DD36, and classic stainless steel only for
Model DD45.
801641
The control kit, available as a sales accessory
801642 for Models DD30 and DD36 and included with
Model DD45, includes the control module, top
804701
cover, mounting brackets, RJ45 connector and
mounting hardware.
Models DD30I and DD30R
Models DD36I and DD36R
Optional downdraft accessories are available
through your Wolf dealer. To obtain local
dealer information, visit the Locator section of
our website, wolfappliance.com.
3
2 / "
8
(60)
"
K I T S
Classic Stainless DD30CONTROL/S
Platinum Stainless DD30CONTROL/P
Carbon Stainless DD30CONTROL/B
Classic Stainless DD36CONTROL/S
Platinum Stainless DD36CONTROL/P
Carbon Stainless DD36CONTROL/B
5