Download Print this page
Wolf DD45I Specifications

Wolf DD45I Specifications

Downdraft systems
Hide thumbs Also See for DD45I:

Advertisement

Planning Information
Models DD45 I and DD45 R Downdraft Systems
Model DD45I
Internal Blower
Model DD45R
In-Line or
Remote Blower
Model DD45I 45" (1143) downdraft
ventilation system includes a 500 CFM
internal blower. In-line and remote blower
options are available for Model DD45R.
Control module and top cover come in
classic stainless steel only and are
included with the downdraft.
Dimensions in parentheses are in
millimeters unless otherwise specified.
9/06
Top cover
Aluminum mesh
Stainless steel filter
filters
covers
T
he cooktop downdraft unit rises from the countertop
to whisk away odors and smoke into the easy-to-clean,
five-layer mesh filter. The control module and top cover
come in classic stainless steel only and are included
with the downdraft.
Wolf downdraft ventilation systems are recommended
for use with Wolf electric and gas cooktops and
integrated modules, excluding the unframed electric
cooktops and electric grill, steamer and fryer modules.
Wolf downdraft systems cannot be used with Wolf dual
fuel ranges, gas ranges, sealed burner rangetops and
gas rangetops.
9" (229) chimney
elevation
Three-speed blower
control
Remote-mounted
control module
Location of rating
plate
1

Advertisement

loading

Summary of Contents for Wolf DD45I

  • Page 1 Wolf downdraft ventilation systems are recommended for use with Wolf electric and gas cooktops and integrated modules, excluding the unframed electric cooktops and electric grill, steamer and fryer modules.
  • Page 2 Planning Information Models DD45 I and DD45 R Downdraft Systems F E A T U R E S Control module and top cover are available in the classic stainless steel finish only Remote-mounted control module Internal, in-line and remote blower options Three-speed blower control Filter clean timer lets you know when the filter needs cleaning...
  • Page 3 801641 1200 CFM Remote Blower 801642 1500 CFM Remote Blower 804701 Refer to the Wolf Cooktop Ventilation Recommendations chart at the end of this section. A C C E S S O R I E S Transitions in various sizes Accessories are available through your Wolf dealer.
  • Page 4 Planning Information Models DD45 I and DD45 R Downdraft Systems 3 /4 " MIN (45) BACK EDGE OF COOKTOP TO INSIDE OF CABINET BACK* .344" 5 /16 " (745) COUNTERTOP TO BOTTOM OF AIR BOX L O C A T I O N O F E L E C T R I C A L 24"...
  • Page 5 Follow dimensions given in the Countertop Cut-out illustration on page 3. Model DD45I has a 500 CFM internal blower. Model DD45R is shipped without the blower assembly. In-line and remote blower assemblies are available. Blower options vary with the volume of air that needs to be moved and the length of the duct run.
  • Page 6 Models DD45 I and DD45 R Downdraft Systems D U C T I N G C O N S I D E R A T I O N S Except for Models DD30I, DD36I and DD45I, which include a 500 CFM internal blower, Wolf downdrafts are shipped without the blower assembly.
  • Page 7 The downdraft will operate most efficiently when ductwork does not exceed 40' (12 m) in length. Consult a qualified HVAC engineer for specific ducting applications. IMPORTANT NOTE: All Wolf downdrafts must be vented to the outside. Use only metal ductwork. WALL CAP 12"...
  • Page 8 Internal, in-line and remote blower assemblies are available as sales acces- sories through your Wolf dealer. Wolf internal, in-line and remote blowers are for use with Wolf cooktop hoods, downdraft systems and Pro ventilation hoods and hood liners.
  • Page 9 215* *Use these requirements to determine total CFM when installing multiple cooktops or modules. CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW). Additional CFM may be required for long duct runs.

This manual is also suitable for:

Dd45r