Contents Important Note Wolf Downdraft Ventilation ..... . 3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted Installation Considerations .
The homeowner should keep this installation guide for future reference. Any questions or problems regarding the installation should be directed to your dealer or Wolf Appliance, Inc. at 800-332-9513. You can also visit our website, wolfappliance.com.
Installation Considerations • Proper installation is the responsibility of the installer. Wolf downdraft systems can be used with all Wolf induc- Product failure due to improper installation is not tion, electric and gas cooktops, except unframed models. covered under the Wolf warranty. Refer to the down- Wolf downdraft systems cannot be used with the steamer draft ventilation use &...
Downdraft Specifications wolfappliance.com/specs Overall Dimensions MODELS DD30I AND DD30R 30" (762) " (60) " (230) " (667) " (38) DEPTH OF CHIMNEY MODELS DD36I AND DD36R 36" " (914) (60) " (230) " (819) " (38) DEPTH OF CHIMNEY MODELS DD45I AND DD45R "...
Page 6
(64) min COUNTERTOP CUT-OUT (TOP VIEW) Refer to the illustrations for specifications for a downdraft model DD30, DD36 or DD45 installed with a Wolf 30" (762) or 36" (914) cooktop or combination of cooktop and/or integrated modules. 1 /2 1 /8 "...
Page 7
(70) 27" 33" Refer to the illustrations for specifications for a downdraft (686) OR (838) DOWNDRAFT CUT-OUT model DD30 or DD36 installed with a Wolf sealed burner rangetop model SRT304 or SRT366. 30" 3" (762) rec (76) min FLAT TO CONTROL...
Page 8
Downdraft Specifications Electrical Requirements Wolf downdraft ventilation systems require a separate, grounded 120 V AC, 60 Hz power supply. The service The electrical outlet must be checked by a qualified should have its own 15 amp circuit breaker, and a...
Downdraft Installation wolfappliance.com/specs Downdraft Installation CONTERTOP CUT-OUT INSTALL THE DOWNDRAFT • Position the cooktop cut-out so that it is far enough • Set the downdraft into the opening. Extend the leveling forward in the countertop for the downdraft to fit brackets to the floor of the cabinet so the downdraft behind it.
Page 10
Carefully drill the three holes through the countertop. Be careful not to damage or chip the countertop IMPORTANT NOTE: The downdraft must be used with a surface while drilling. Wolf-approved control module and top cover. • Check the countertop thickness. Set the control The 2 "...
Page 11
Downdraft Installation wolfappliance.com/specs Blower Considerations Ducting Considerations Downdraft models DD30I, DD36I and DD45I include a 500 IMPORTANT NOTE: Consult a qualified HVAC professional CFM internal blower. In-line and remote blower assemblies for specific installation and ducting applications. are available for models DD30R, DD36R and DD45R Downdraft models with an internal blower have a through your authorized Wolf dealer.
Page 12
Mount the roof or wall cap and work back towards the cabinet, attaching all ductwork, elbows and transitions Wolf downdraft systems have an adjustable discharge that as previously planned. Tape all ductwork connections will allow you to negotiate ducting around floor joists and to make them secure and air tight.
Page 13
Downdraft Installation wolfappliance.com/specs Blower Discharge Adjustment DOWN DISCHARGE ADJUSTMENT LEFT OR RIGHT SIDE DISCHARGE Adjusting the down discharge left or right will keep the Substituting down discharge with left or right discharge blower discharge in the down position but allows some will switch the blower discharge from the down position to side-to-side adjustment.
Page 14
Downdraft Installation Wiring Connections INTERNAL BLOWER REMOTE BLOWER • Mount a standard 120 V AC electrical box, with IMPORTANT NOTE: For mounting and installation of the 3-pronged grounded receptacle, inside the cabinet or remote blower, refer to the installation instructions for your adjacent cabinet.