Removing And Replacing The Keypad - Motorola MOTOKRZR K3 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Keypad

6809509A88-O
1. Remove the battery cover, battery, SIM card, antenna, rear housing, and
transceiver PC board, as described in the procedures.
2. Using the plastic tweezers, gently lift up the keypad and remove it from the
front housing, as shown in Figure 11.
Figure 11. Removing and Replacing the Keypad
3. To replace, align the keypad with the front housing and lower it into place.
4. Replace the transceiver PC board, rear housing, SIM, battery, and battery
cover as described in the procedures.
February 02, 2007
Plastic tweezers
Keypad
Disassembly
061268o
29