Level 1 and 2 Service Manual
Removing and Replacing the Keypad, Volume/Smart and Voice Buttons
6809490A75-O
1.
Remove battery cover, battery, SIM, antenna, rear housing, and transceiver
board assembly as described in the procedures.
2.
Using the tweezers, lift the keypad assembly out of the front housing with
caution (see Figure 10).
Figure 10. Removing the Keypad
3.
To replace, carefully set the keypad volume/smart buttons and voice button
assembly into the front housing, ensuring the keys align properly with the
openings in the front housing, and fits over the keypad guides molded into the
front housing.
4.
Replace the transceiver board assembly, Display flex connector, rear housing
assembly, antenna, SIM, battery, and battery cover as described in the
procedures.
November 16, 2004
Keypad
Disassembly
041180o
29