Motorola MOTOKRZR K3 Service Manual page 31

Level 1 and 2 Service Manual
6809509A88-O
4. Turn the transceiver board assembly over and use the plastic tweezers to lift
the antenna assembly away from the transceiver board assembly (see
Figure 13).
Plastic tweezers
Figure 13. Removing and Replacing the Antenna Assembly
5. To replace, carefully align the antenna assembly to the transceiver board
assembly. Carefully press the antenna assembly into position on the
transceiver board assembly until the latches engage.
6. Replace the transceiver PC board assembly, rear housing assembly, SIM,
battery, and battery cover, as described in the procedures.
February 02, 2007
Antenna assembly
Transceiver PCB assembly
Disassembly
070040o
31