Motorola MOTOKRZR K3 Service Manual page 37

Level 1 and 2 Service Manual
6809509A88-O
4. Use the T-5 driver to remove the 4 screws from the flip assembly (see
Figure 20). Retain the screws for reassembly.
Figure 20. Removing the Flip Assembly Screws
5. Lift the flip cover away from the flip assembly. Be careful not to damage the
display flex cable.
6. To replace, insert and tighten the 4 flip assembly screws with the T-5 driver.
Tighten to final torque setting of 16 Ncm (1.5 inch lbs.).
7. Align the flip assembly bezel to the flip assembly.
8. Expose the adhesive surface and carefully press flip bezel onto the flip cover.
9. Replace the transceiver board assembly, rear housing, battery, and battery as
described in the procedures.
February 02, 2007
Flip assembly screws
Flip assembly screws
Disassembly
070091o
37