Motorola MOTOKRZR K3 Service Manual page 33

Level 1 and 2 Service Manual
6809509A88-O
1. Remove the keypad mylar with plastic tweezers, as shown.
Plastic tweezers
Figure 15. Removing the Keypad Mylar
2. To replace the keypad mylar, use the K3 EL and Acoustic Gasket Alignment-
and Press tool.
3. Peel off the adhesive liner from the bottom side of the keypad mylar. Place the
keypad into the fixture. Align the keypad using the fixture alignment pins.
Figure 16. Keypad Mylar Alignment
February 02, 2007
Disassembly
Keyboard mylar
070210o
070211o
33