Removing And Replacing The Rear Housing - Motorola MOTOKRZR K3 Service Manual

Disassembly

Removing and Replacing the Rear Housing

G
G
24
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery door, battery, and SIM as described in the procedures.
In addition to 6 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2. Using a Torx driver with a T-5 bit, remove the 6 housing screws. Retain the
screws for reassembly. See Figure 5.
Figure 5. Removing the Rear Housing Screws
February 02, 2007
Housing screws
Housing screws
K3
065321o
6809509A88-O