Removing And Replacing The Keypad - Motorola C25 Series Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Keypad

6881041B25
1. Remove the battery cover, battery, SIM, antenna cover, rear housing, and
transceiver board, as described in the procedures
Figure 13. Removing the Keypad
2. Lift the keypad from the front housing as shown in Figure 13.
3. To replace, insert the keypad into the front housing. Ensure the keys align
properly with the openings and the keypad is fully seated in the front housing.
4. Replace the transceiver board, rear housing, SIM, battery, and battery cover
as described in the procedures.
5. Verify correct operation.
October 14, 2002
FRONT HOUSING
PLASTIC TWEEZERS
Disassembly
.
KEYPAD
020587-o
27