Motorola MOTOKRZR K3 Service Manual page 25

Level 1 and 2 Service Manual
6809509A88-O
3. Release the four housing latches by inserting the pointed end of the plastic
disassembly tool into the openings on the rear housing.
Latch
Latch
Figure 6. Removing the Rear Housing Latches
4. Carefully rotate the rear housing away from the front housing.
5. Lift the rear housing assembly away from the phone.
6. To replace, align the housing latches with the corresponding openings on the
front housing. Gently press the housings together until the catches snap into
place.
7. Replace the 6 housing screws and tighten to a final torque setting of 16 Ncm
(1.5 inch pounds). Do not over tighten.
8. Replace the SIM, battery, and battery cover as described in the procedures.
February 02, 2007
Housing latch
Disassembly tool
Disassembly
065326o
25