Disassembly
Removing and Replacing the Front Housing
G
20
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
To Remove the Front Housing
1.
Ensure the phone is off.
2.
Remove the battery door (see page 16).
3.
Remove the battery (see page 17).
4.
Remove the USIM (see page 19).
5.
Using a T8 driver, remove the two screws that secure the front housing to the
rear housing (see Figure 7A).
A
DRIVER
Figure 7. Removing the Front Housing
October 27, 2003
020819o.eps
A920, A925
020819o
6881024B40-A