Disassembly
Removing and Replacing the Rear Housing
G
G
22
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, and antenna cover as described in the
procedures.
2.
Using the Torx driver with a T5 bit, remove the 4 screws shown in Figure 9
and set aside for reuse.
3.
Carefully lift the rear housing away from the front housing as shown in
Figure 8.
SCREWS
SCREWS
Figure 9. Removing the Rear Housing
October 14, 2002
Product Family C25
REAR HOUSING
020582-o
6881041B25