Panel And Keyboard Introduction - Excell SUBe AirCharge Service Manual

EXCELL PRECISION CO., LTD.

1-3 Panel and Keyboard Introduction

:
0
Zero point indication
 
:
Stable
The weight is stable
:
Net Net weight indication
:
Low power indication
:
Charging indication. Red indicates charging. Blue indicates fully charged.
Charging
Unit "kilogram"
kg :
:
Unit "gram"
g
Keyboard Function
POWER/ZERO KEY
This key possesses three functions: Power On: press the key when scale is off.
 Power Off: while scale is on, hold the key until the scale is switched off.
 Zero function: when the weigh pan is empty (free of load) and the display is not showing
zero, press the
UNITS KEY
Press the key to switch between the 1
active units. The 2
disabled.
 After power off, the scale will memorize the active units. When the scale is powered on
again, it displays the previously active units.
TARE KEY
The tare function will not operate during the following conditions:
1. When the scale powers on if the weight is negative and after a container is placed on
the weigh pan if the weight is still below zero.
2. The tare value is over the full scale capacity.
020359XX
key to zero the scale. At zero, the "0" indication is on.
nd
weight unit is set in FnC 08. When FnC 08 = 0, 2
HI : Upper limit
: Value between HI and LO
OK
: Lower limit
LO
: Battery level indication (only for newer scale)
Unit "pound" or
:
lb
Unit "lb + oz" with "." separates lb and oz
st nd
and 2 weight units; the icons will indicate the
7
nd
weight unit is
ZSME300000434