Panel And Keyboard Introduction - Excell ELW Max User Manual

EXCELL PRECISION CO., LTD.
Low Battery Warning
When shows up, it will have approximately 10 hours of operation left. Then
symbol will flash on the display; please replace the dry batteries soon when one of those
two symbols appears.
When the battery voltage is less than 3.8 V, the scale would power off automatically.

1-3 Panel and Keyboard Introduction

Icon Introduction
STABLE : The weight is stable.
GROSS : The scale is in the gross mode. The display shows the goods and any
container weight. This Gross status indication is on when the TARE
function is used.
: The unit weight is not sufficient. When the icon is on, the counting
Pcs
function is operational but the count may contain errors.
: The sampling size is not sufficient When the icon is on, the counting
.
. .
. . .
function is operational but the count may contain errors.
. . . .
RANGE 1 : Only available for multi-range models
RANGE 2 : Only available for multi-range models
Keyboard Function
ON/ZERO KEY
This key possesses two functions: Power On and Zero function.
OFF KEY
When the scale is switched on, press the OFF key, the scale will switch off.
TARE KEY
The tare function will not operate during the following conditions:
1. When the scale powers on if the weight is negative and after a container is placed on
the weigh pan if the weight is still below zero.
2. The tare value is over the full scale capacity.
02026010
RANGE 1 RANGE 2
4 ZSME300000369