EXCELL PRECISION CO., LTD.
1-6 Display
Accumulation
Zero
Minus sign
Tare Mode
1-7 Keyboard Function
OFF
: Off key. Press the key to switch the balance off.
: Function key. Press the key to select different operation modes: weighing mode,
MODE
counting mode, and percentage mode.
UNITS
: Units key. Press the key to select the desired weighing unit.
: Unit weight key (for non-approval models). Press the key to show the unit weight.
UNIT
WT
" " In the calibration mode or function settings, press the key for downward digit
: Resolution key (for approval models). Press the key to show the unit weight or shift
HR
" " In the calibration mode or function settings, press the key for downward digit
: Sample key. In the counting or percentage mode, press the key to calculate the unit
P
CS
weight of the sample.
" " In the calibration mode or function settings, press the key for upward digit
: Confirmation key. Press the key to confirm the setting.
: Tare key. Press the key to deduct the weight of a container. To exit the tare mode,
T
press the tare key again, when the plate is empty.
" " In the calibration mode or function setting, press the key to move the cursor
→0←
: On/Zero key. When the scale is off, press the key to switch the scale on. When the
ON
scale is on, press the key to zero the scale.
" " In the calibration mode or function setting, press the key to move the cursor
BH3 Series (02024013)
selection and downward moving.
weighing resolution between normal resolution and high resolution.
selection and downward moving.
selection and upward moving..
one step to the left.
one step to the right.
線粗1.5mm
10
Stable
Low battery
indicator
indicator
Unit display
ZSME300000289