Excell SUBe AirCharge Service Manual page 21

EXCELL PRECISION CO., LTD.
NOTE 1
(a) (b) (c) (d) (e) (f)
(a)  The first weight UNITS (only "kg", "g", or "lb" are available to choose from. Please select
one of the parameters 0, 1, or 2)
(b)  The second weight UNITS (select one of the parameters described below)
(c)  The third weight UNITS (select one of the parameters described below)
(d)  The fourth weight UNITS (select one of the parameters described below)
(e)  The fifth weight UNITS (select one of the parameters described below)
(f)  The amount of the weight UNITS selected (select one of parameters 1 ~ 5)
The description of the parameters
0  kg (Decimal system) 5  oz (Decimal system)
1  g (Decimal system) 6  GN (Decimal system)
2  lb (Decimal system) 7  dwt (Decimal system)
3  reserved
4  lb, oz (hexadecimal) 9  HK.Tael (hexadecimal)
For example:
Choose "kg" & "lb" (two weight UNITS). NOTE the scale is calibrated using "kg" weights
and key in 020002
NOTE 2
(g) (h) ( i) ( j ) ( k ) ( l)
For example:
15.000 kg  key in 015000 1500.0 g  key in 015000
NOTE 3
(m) (n) (o) ( p ) ( q)
(m)  Division base value, select 1, 2, or 5
(n)  The number of decimal places (0 ~ 5)
For example: 15.000 kg  enter 3, 1500.0 g  enter 1, 6.000 lb  enter 3
(o)  Range setting (select one of parameters 0, 1, 2, or 3)
For example: 0, 1  full segment range,
2  2 segment range (divided at 1/2 of the full scale),
3  3 segment range (divided at 1/6 of the full scale & 2/3 of the full scale)
(p)  0 : multi-interval
Multi interval: Multiple segment range and each segment with its own minimum and
maximum capacity and scale interval. The selection of the appropriate
weighing segment is determined automatically according to the load
applied, both on increasing and decreasing loads.
Multi range: Similar to Multi-interval, but the scale interval unchanged when unloading
until weight return to zero.
020359XX
8  ct (Decimal system)
1 : multi-range
19
6.000 lb  key in 006000
ZSME300000434