Excell SUBe AirCharge Service Manual page 3

EXCELL PRECISION CO., LTD.
3-4-2 Approval Configuration
3-4-3 Buzzer Device Setting
3-4-4 Initial Zero Setting
3-4-5 Tare Function Setting
3-4-6 Software Seal Function Setting
3-5 L G
OCAL RAVITY
APPENDIX 1 7-SEGMENT DISPLAY CHARACTERS....................................................... 42
Check Firmware Version
Turn of the scale and hold
01 Adc. Press
version 02035. Press
off and turn on scale to return to weighing mode.
020359XX
S
ETTING
key, then turn on the scale and hold
key twice, then display 03 VEr. Press
key. Display maintenance number 9XX for 2 seconds. Turn
........................................................ 36
............................................................. 37
................................................................. 38
............................................................... 39
............................................... 40
.................................................................. 41
1
key. Display
key. Display firmware
ZSME300000434