Precautions For Use - Excell SUBe AirCharge Service Manual

EXCELL PRECISION CO., LTD.
Thank you for purchasing EXCELL waterproof
weighing scale. In order to use the scale properly,
please read this instruction carefully before use. If
you have a problem concerning the scale, please
contact your supplier.
Preparing to Use the Scale
1. Locate the scale on a firm level surface free from vibrations for accurate weight
readings. Adjust the four leveling feet to centre the leveling bubble on the scale.
2. Avoid hot sunshine directly on the scale or near the exhaust port of ventilating system.
3. Please use a separate power source plug to avoid the disturbance of other electric
appliances.
4. There should be no weight on the scale when power is turned on.
5. Commodity should be placed at the centre of platter when being weighed, and its size
should not exceed the dimension of the platter.
6. Please warm the scale 15 ~ 20 minutes before using.
7. Please note that when
charged.
8. Any suggestion is warmly welcome.

Precautions for Use

1. Please operate or charge the scale in an open area. Do not squeeze the power cord to
avoid wire on fire.
2. Please keep scale in a cool and dry place. Do not store under high temperatures.
3. Please keep the scale clean and free from insect infestation.
4. Avoid impacting with other items or overloaded with excessively heavy weights (The
load must not exceed the maximum capacity of the scale).
5. If the scale is not going to be used for some time, please clean it and store it in a
plastic bag in dry condition. A desiccant sachet may be included to prevent moisture
from building up.
6. Operating temperature: -10℃ ~ + 40℃
7. It is recommended to be used indoors and in environments with a height of less than
2000m
8. If the product is used in a manner not specified by the manufacturer, product warranty
may be limited.
Safety Instructions for Lithium Batteries
1. Please pay attention to the storage temperature of the product. Do not place it in a high
temperature environment. The ambient temperature should be less than 50C.
2. After installing the battery, if no display when power is turned on, please check whether
the battery polarity is reversed. The polarity must be installed correctly to avoid battery
power wasted away.
3. When the "Charging" indicator flashes in the charging state, it means there are the
following abnormal states, please check:
020359XX
symbol appears on the screen, the scale needs to be
2 ZSME300000434