Scanning Memory Channels; Locking Out Memory Channels - Kenwood TH-28A Instruction Manual

@ Programmable Band Scan
The scan range for this mode is specified in memory.
(page 23)
m MHz Scan
Scans over a1 MHz range. (page 26)
m VFO / Memory Scan
Provides alternate scanning of the VFO and last used
memory channel. (page 26)
m CALL/VFO Scan
Provides alternate scanning of the call channel and
the VFO. (page 26)
mw CALL / Memory Scan
Provides alternate scanning of the call channel and
last used memory channel. (page 26)
mg V/M/C(VFO/Memory/CALL) Scan
Scans the VFO, the last memory channel used, and
the call channel. (page 26)
3 Scanning Memory Channels
Note
The transceiver scans only those memory channels
that have data entered and are not locked out.
Scanning does not start unless two channels or
more have data entered.
1 Adjust the SQL control to the threshold point.
2 Press the MR key.
3 Press and hold the MR key for longer than one
second. The MHz indicator (decimal) flashes when
the transceiver is scanning.
4 Press the PTT switch to stop scan.
4 Locking Out Memory Channels
This function allows you to specify which memory
channels you want to skip during memory channel
scan.
1 Select the appropriate numbers of the memory
channels that you want to skip.
f fA Pe
tee ra
f2
j we
23