Key features of the Firebox V10 security appliance
The front panel of a Firebox V10 appliance contains the features shown in
the following illustration.
What you should know about these features
Installation Guide
Three LED's
One Power LED
Power
Alarm
Admin
Key features of the Firebox V10 security appliance
Labeled Alarm, Admin and Ready
Located in the lower right corner
The Power LED indicates that the appliance has
been turned on; however, the Ready LED
(described below) is the best indicator of the
appliance's readiness for use.
The Alarm LED will be lit when certain severe
alarms have been triggered. The Firebox Vclass
appliances support multiple types of alarm
notification including Alarm LED activation,
page/e-mail messaging, and the Alarm Manager
feature of the WatchGuard Vcontroller, which are
discussed in the System Administration Guide.
The Admin LED will be lit whenever a system
administrator is currently connected to the
appliance by means of the Vcontroller or the
WatchGuard CLI.
5