CHAPTER 2: Installing a Firebox Vclass Security Appliance
What you'll be doing
The following illustration highlights the basic series of installation/setup
tasks:
1
2
3
4
5
The rest of this Installation Guide will get you to the point where you've
set up the appliance and installed WatchGuard Vcontroller. At this point
20
Place the security appliance in its setting and connect it to the
network.
Turn on the appliance.
Install the WatchGuard Vcontroller on a local administration
workstation.
Use the Vcontroller to discover the ready-to-configure appliance.
Configure the appliance and deploy the needed appliance profile,
featuring the complete configuration and a full complement of
security policies.
Vcontroller 3.2