Setting Up Logging To A Syslog Host - Watchguard Firebox SOHO 6 Wireless User Manual

5 Type a passphrase in the Log Encryption Key field and then
type it again to confirm in the Confirm Key field.
6 Click Submit.
Use the same encryption key recorded in the WSEP application.

Setting up Logging to a Syslog Host

This option sends the SOHO 6 Wireless log entries to a Syslog host.
Follow these steps to configure a Syslog host:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Logging = > Syslog Logging.
The Syslog Logging page opens.
3 Select the Enable syslog output checkbox.
4 Type the IP address of the Syslog server.
In the illustration, the IP address is 206.253.208.100.
User Guide
Setting up Logging to a Syslog Host
N
OTE
91