Vpn Management - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 11: Support Resources
5 Type the new protocol number in the Protocol field.
6 Click Submit.
7 From the navigation bar on the left side, select
Firewall => Incoming.
The Firewall Incoming Traffic page opens.
8 At the bottom of the page, locate the new service under the
Custom Service list and select Allow from the drop-down list.
9 Type the IP address of the computer that is to receive the
incoming data in the Service Host field.
10 Click Submit.

VPN Management

See "What You Need" on page 107.
Make sure that the two appliances use the same encryption and
authentication method.
How do I set up my SOHO 6 Wireless for VPN Manager
Access?
This requires the add-on product, WatchGuard VPN Manager,
which is purchased separately and used with the WatchGuard
Firebox System software. Purchase VPN Manager through the
WatchGuard Web site:
https://www.watchguard.com/products/vpnmanager.asp
For more information on how to allow VPN Manager access to a
SOHO 6 Wireless, see the WatchGuard Firebox System VPN Guide.
How do I set up VPN to a SOHO 6 Wireless?
Information about how to configure a VPN tunnel between a
SOHO 6 Wireless and another IPSec-compliant appliance is
available from the WatchGuard Web site:
172 WatchGuard Firebox SOHO 6 Wireless