Configuring The Trusted Network - Watchguard Firebox SOHO 6 Wireless User Manual

5 Type the PPPoE login name and domain as well as the PPPoE
password supplied by your ISP in the applicable fields.
6 Type the time delay before inactive TCP connections are
disconnected.
7 Click Automatically restore lost connections.
This option keeps a constant flow of traffic between the SOHO 6 Wireless
and the PPPoE server. This option allows the SOHO 6 Wireless to keep
the PPPoE connection open during a period of frequent packet loss. If the
flow of traffic stops, the SOHO 6 Wireless reboots. A reboot frequently
restores the connection. The ISP sees this constant flow of traffic as a
continuous connection. The regulations and billing policy of the ISP
determine if you can use this option. WatchGuard Technical Support uses
this feature as a solution to some problems.
Click Enable PPPoE debug trace to activate PPPoE debug
8
trace.
9 Click Submit.
The configuration change is saved to the SOHO 6 Wireless.

Configuring the Trusted Network

The DHCP Server option sets the SOHO 6 Wireless to assign IP
addresses to the computers on the trusted network. The SOHO 6
Wireless uses DHCP to make the assignments. When the SOHO 6
Wireless receives a request from a new computer on the trusted
network, the SOHO 6 Wireless assigns the computer an IP address.
If you use a DHCP server to assign IP addresses, enable the DHCP
Relay option. This option causes the SOHO 6 Wireless to forward
the DHCP request to the specified DHCP server.
User Guide
Configuring the Trusted Network
45