Watchguard Firebox SOHO 6 Wireless User Manual page 80

Chapter 4: Configure the Network Interfaces
Disabled
The default is Disabled. You should use this option for the
initial connection. Your wireless connection does not use
WEP when Disabled is selected.
40/64 bit WEP or 128 bit WEP
After you complete the initial connection between your
wireless computer and SOHO 6 Wireless, you can change
the Encryption setting to add WEP. Select either 40/64 bit
encryption or 128 bit encryption. Select the highest level of
encryption supported by the wireless card in the wireless
computer.
4 If you have selected WEP encryption, type a hexadecimal
number in the Key text boxes.
You can enter up to four keys that the wireless network will use for
connections. If you have selected 40/64 bit WEP , the key can be up to 10
characters. If you have selected 128 bit WEP , the key can be up to 26
characters.
5 If you have typed more than one key, select the key you want
to use as the default key from the Default Key drop-down list.
6 Select the Authentication mode you want to use for your
wireless network connection.
The options are Open System, Shared Key, and Both.
Open System
This option does not support shared keys. If you disable
encryption, this is the only option.
Shared Key
This option supports shared keys. If you enabled WEP, this
option is enabled.
54 WatchGuard Firebox SOHO 6 Wireless