Watchguard Firebox SOHO 6 Wireless User Manual page 166

Chapter 10: MUVPN Clients
8 When you set the Subnet and Mask addresses, you define
whether or not an MUVPN user can access the Internet
through the tunnel. If you want to access only the Trusted
network, type the trusted network address in both the Subnet
and Mask fields. If you want to access both the Trusted
network and the Internet, type 0.0.0.0 in both the Subnet and
Mask fields.
The addresses you type in the Subnet and Mask fields must be identical to
the Virtual IP Address you typed on the Add MUVPN Client page. See
"Configuring the SOHO 6 Wireless for MUVPN Clients" on page 122.
9 Select All from the Protocol drop-down list.
This is the default setting.
10 Select the Connect using checkbox and then select Secure
Gateway Tunnel from the Connect using drop-down list.
11 Select IP Address from the ID Type drop-down list and then
type the IP address of the optional (wireless) interface in the
applicable field.
140
N
OTE
WatchGuard Firebox SOHO 6 Wireless