Configuring Static Routes - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 4: Configure the Network Interfaces

Configuring Static Routes

To send the specified packets to different segments of the trusted
network connected through a router or switch, configure static
routes.
Follow these instructions to configure static routes:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Network = > Routes.
The Routes page opens.
3 Click Add.
The Add Route page opens.
58 WatchGuard Firebox SOHO 6 Wireless