Creating An Unrestricted Pass Through - Watchguard Firebox SOHO 6 Wireless User Manual

network. You can enter a new MAC address for use on the external
network.
Follow these steps to enable this option:
1 Select the Enable override MAC address for the External
Network checkbox.
2 Type the new MAC address for the SOHO 6 Wireless external
network.
3 Click Submit.
If the MAC address for the external network field is cleared and the
SOHO 6 Wireless is rebooted, the SOHO 6 Wireless is reset to the
factory-default MAC address for the external network.
To prevent MAC address collisions, the SOHO 6 Wireless searches
the external network periodically for the override MAC address. If
the SOHO 6 Wireless finds a device that uses the same MAC
address, the SOHO 6 Wireless resets to the factory-default external
MAC address and reboots.

Creating an Unrestricted Pass Through

The SOHO 6 Wireless can allow traffic to flow from the external
network to a computer on the trusted network that has a public IP
address.
Follow these steps to configure a pass through:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
User Guide
Creating an Unrestricted Pass Through
N
OTE
85