Configuring The Trusted Network; Configuring Dhcp Server And Dhcp Relay - Watchguard Firebox SOHO 6 User Manual

Chapter 4: Configure the Network Interfaces
To set the external network link speed:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Network = > External.
The External Network Configuration page opens.
3 From the Link Speed drop-down list, select the link speed you
want.
4 Click Submit.

Configuring the Trusted Network

The DHCP Server option sets the SOHO 6 to assign IP addresses to
the computers on the trusted network. The SOHO 6 uses DHCP to
make the assignments. When the SOHO 6 receives a request from a
new computer on the trusted network, the SOHO 6 assigns the
computer an IP address. If you use a DHCP server to assign IP
addresses, enable the DHCP Relay option. This option causes the
SOHO 6 to forward the DHCP request to the specified DHCP
server.

Configuring DHCP server and DHCP relay

To configure DHCP server:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Network = > Trusted.
The Trusted Network configuration page opens.
36 WatchGuard Firebox SOHO 6