Table of Contents
Advertisement
Chapter 5
Factory Default
Tip: Use this configuration to restore the factory default settings if you are unsure
how your scanner has been configured. The 'Factory Default' configuration is very
useful when you need to reprogram your Wasp
WLP 4170 CCD Scanner after the defaults have been changed. By setting
the default configuration, the user knows precisely the configuration for each
programmed setting.
1. Scan "Begin "
Begin
2. Scan "Default" to restore
scanner to default settings
Default
NOTE: Scanning these bar codes returns the scanner to the
factory default settings
10
Advertisement
Table of Contents
