Locating A Particular Point; In A Track - Sony MDS-JB940 Operating Instruction

"© You can extend the playing time during Music Scan
1 While the deck is stopped, press MENU/NO twice.
sup Menu" appears in the display:
2 Tum AMS (or press KL repeatedly) until "M. Scan
appears, then press AMS or YES.
MS (or press K€ PPA repeatedly) to select the
ime within a range of six to twenty seconds in
'one second steps), then press AMS or YES,
4 Press MENUINO.
Playing a track by entering the track
number (7)
Press the number button(s) to enter the track number
of the track you want to play.
1 Pross >25.
2 Enter the corresponding digits.
To enter 0, press 10 instead.
Examples
+ To play track number 30, press >25, then 3 and 10.
+ To play track number 108, press >25 twice, then 1
10, and 8.
Ë if you enter a track number while the deck is paused
The deck will tll be paused at the beginning of the track.
Locating a particular point
in a track
'You can locate a particular point in a track during play or
play pause.
Locating a point while monitoring the
sound
During play, press down </>» until you reach the
point you want.
You will hear intermittent playing as the disc goes forward
or in reverse. When you reach the point you w a n t , release
the button.
Notes
+ Ifthe MD reaches the end while you're p
stops.
Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed,
san Burser |
ssing PP, the deck
Locating a point by observing the time
indication
During play pause, press down 44» until you reach
the point you want
When you reach the point y o u want, release the button, To
start playing, press > or HE, No sound is output during
this time,
TÜ when "- over -" appears in the display
"The MD has reached the end while you're pressing D, Turn
AMS counterclockwise (or press HM) or press 44 10 go back.
Playing a specific rack/Locating a particular point in a track | 25 58