Sony MDS-JB940 Operating Instruction page 13

3 Turn AMS (or press + />»1 repeatedly) to change
the setting, then press AMS.
4 To complete the setting, press AMS or <</>>
repeatedly until the minute indication flashes, then
press AMS or YES.
Each press of the button changes the display as follows:
+ Current display
Date
l
Time
Ñ For precise date and time stamping of recordings
Reset the time atk
Note
If the AC power cond is disconnected for a long t i m e , the
ist once a week,
norized clock s e t t i n g s will disappear and "Initialize" will
flash in the display t h e next time you plug in and tum on the
deck, If this happens, reset the clock,
Displaying the recorded date [Ñ
an then check the recorded date and time of a rack.
You
1 Press H#4/»1 or number buttons to locate the
track you want to check.
2 Press DATE RECORDED.
irs if the internal clock has not been
'without a date and time stamp function
paueis Sumoo |
Setting the clock | 13 SE