Remote Control Description - Sony MDS-JB940 Operating Instruction

ee
Remote control
description
'88 6 | Remote contro! description
[VO (power) awit (14) (29)
Press totum on the deck. When you tur on the deck,
the STANDBY indicator on the deck turns off, When
you press the switch again, the deck tums off and the
indicator lighis up.
[2] REC MODE button (16)
Press to set the REC MODE to sterco, LP2 LP4 or
MONO,
INPUT button (14)
Press to select he input jack (or connector) of the
program source to be recorded.
(9) DATE RECORDED button (13) 7
Press to display the recording date and time.
DATE PRESENT bution (13) 7
Press to display the current date and time.
[8] Letterinumber buttons (24) (35) T
Press to input eters or numbers or select a track:
T8] M.SCAN button (24)
Press to scan a rack within a range of 610 20 seconds.
[B] A SPACE button (29) 7
Press Lo insert a three-second blank space between
tacks or to pause play afer cach wrack.
[P PHOLD button (17) Ñ
Press to tum on and off the Peak Hold Function:
18] CLEAR button (27) (35)
Press to cancel the selection.
(9) m bution (15) 23)
Press to top play or recording, or cancel the selected
operation.
A m bution (14) 23)
Press to pause play or recording. Press again to resume
play or recording.
F3 @ button
(14) 18) 19)
Press to recond to the MD, monitor the input signal, or
mark track numbers.
MUSIC SYNC bution (21) T)
Press to start Music Synchro-meconding.
1 TREC button (20) 7)
Press to start Time Machine Recording.
{REC LEVELANALOG
OUT LEVEL +/- buttons (17)
eT
Press to adjust the recording or analog output level.