A Specific Track - Sony MDS-JB940 Operating Instruction

concu À
Note
When you eject the MD or turn off the deck, the output level is
reset to the factory sening (0.0 4B),
Each press of the button changes the display as follows:
'Track number and elapsed time of the current
track
1
'The contents of a program (only when "PGM"
lights up)
Dise neve ana rack name
Level tthe output signat
Pitch display
L- DF (aida tite diapiay
Ñ You can check the remaining time
Press TIME during playback. Each press of the button changes
the display as follows:
+ Track number and elapsed time of the current
track
Track number and remaining time of the current
track
l
'— Remaining time of all recorded tracks
" You can check the track name at any time while
playing F
Press SCROLL
The track name appears and scrolls. While the track name is
Scrolling. press the button again to pause scrolling. and again to
ie:
58 24 | Playing an MD/Piaying a specific track
Playing a specific track
While the deck is playing or stopped, use the procedure
below to quickly play any track.
Locating a track with AMS"
goio
The next or a succeeding Wack
A preceding track during play
Do the following:
"Tum AMS clockwise (or press
PPI repeatedly),
"Turn AMS counterclockwise
press Ke repeatedly)
"Tun AMS counterclockwise
(or press Kee once)
'Tum AMS (or press FT
Pi repeatedly) until the track
number you want to go 10
flashes in the display, then
press AMS or E>.
Press MSCAN before you
start playing. When you find
the wack you want, press >
to start pla
[Tie beginning of the current
track during play
A specific track while the
deck is stopped
1) Automatic Music Sensor
° vou can locate the last track of the MD quickly
While the deck is stopped, turn AMS counterclockwise (or press
144 once).
Ñ it you locate a track while the deck is stopped or
paused
'The deck will still be stopped or paused at the beginning ofthe
located track.