Sony MDS-JB940 Operating Instruction page 47

Naming a track or MD
using the keyboard
If you use a keyboard, you can quickly enter or edit
names. While editing a name, you can move the cursor in
jumps or scroll the name,
'Shortcut to the naming procedure
1 Press [Enter] while the deck is in one of the
operating modes listed below, depending on what
you want to name:
[To name [Press while the deck is
P a y i n g : pause recording. OP
na withthe tack number displayed
The Mp | Stopped with total numberof wack
displayed
A flashing cursor appears in the display.
2 Enter a name.
In addition to letter keys, you can also use the keys
shown in the following table
3 Press (Enter).
The whole name appears in the display,
Operations you may want to do while naming a
track or MD
Switch between uppercase
'Sera then ne [Page Upl or [Page Down]
Erase the character at the
unor postion
[Delete]
{Back Space}
Using the Edit Menu
1 Press [Esc] while the deck is in one of the
operating modes listed below, depending on what
'A tack or the MD
The wack being recorded
"Edit Menu" appea
'Stopped, play
Recording the wack
rs in the display
2 Press [F10V(F11] repeatedly until "Name 2°
appears, then press [F12].
While the deck is recording, a flashing cursor appears
in the display and you can enter a name forthe track
being recorded. In this case, go to step 5.
3 Press [F10){[F11] repeatedly until "Nm in 2"
appears, then press [F12].
A flashing cursor appears.
5 Enter a name.
6 Press [F12].
The whole name appears in the display.
Naming a wacko MD using me keyboard | 47 S8
Paeoqh e Suisn x9 ai aui Bunes J