Operating The Md Deck Using A Keyboard - Sony MDS-JB940 Operating Instruction

Operating the
MD Deck
Using a
Keyboard
'This chapter explains simple ways to
name a track or MD using an optional
keyboard, as well as how to operate the
MD deck directly using the keyboard.
8 46 | sating ne keyboard
Setting the keyboard
You can use any IBM"-compatible keyboard? with a PS/2
interface. You can select a keyboard with either an English
or Japanese keyboard layout. When you use a keyboard
with a different layout, you need to assign
the keys. For details, see "Assigning char
keyboard keys" on page 48.
1) IBM i s the registered trademark of International Business
Machines Corporation,
Power consumption must be 120 mA or l e s s .
menuo
KEYBOARD AMS YES
Connecting a keyboard to the MD deck
Connect the keyboard connector to the KEYBOARD
jack on the front panel of the deck.
You can connect or disconnect the keyboard at any time
r e g a r d l e s s of whether the deck is tumed on oF off
Selecting keyboard type
The first time you connect a keyboard, you need to select
the keyboard type.
1 While the deck is stopped, press MENUINO twice.
"Setup Menu" appears in the display
2 Turn AMS (or press 4/1 repeatedly) until
"Keyboard 2" appears, then press AMS or YES.
3 Turn AMS (or press 4/1 repeatedly) until
"Type" appears, then press AMS or YES.
4 Tum AMS (or press 4/1 repeatedly) to select
the setting, then press AMS or YES.
[To use the keyboard with [Select =]
English keyboard layout [US (acing Seung)
Japanese keyboard lay i
1) You can also recall the factory senting by pressing
CLEAR,
5 Press MENU/NO.